7-1/2 H.P., 12 in THROAT (IW66D) - 20 in THROAT (IW66DX),
5 WORK STATIONS AND FULL CONTROL FOOT PEDAL
Capacities & Specifications Rated on 65,000 PSI Tensile
PUNCHING
Punch Pressure: 66 tons.
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and
easy setup.
Die Holder: Adjustable in machined T-slots for quick punch and die alignment.
Standard Tooling: 1-1/2 in in 3/8 in material.
CPD Series: 26 punch, 62 die.
Large Tooling: 2 in in 5/16 in material.
CPD Series: SP51P punch, SP80D die.
Optional Oversize Tooling: 6 in in 3/32 in material.
Maximum Channel Flange: 7 in.
Throat Depth: 12 in (D); 20 in (DX).
Stroke Length: 3-15/16 in.
Cycles per Minute in 3/4 in: 30.
Punching Station Work Height: 39-3/4 in.
FLAT BAR SHEARING
Flat Bar Shear Capacity: 14 in in 9/16 in.
Maximum Width x Thickness: 10 in 3/4.
Lower Blade: Four (4) usable edges.
Support Table: Includes guides for accurate positioning and
indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down: Holds work piece securely in position
when shearing.
Upper Shear Blade: Provides for minimum distortion. Two (2)
usable edges.
Blade Length: 14-1/4 in.
Angle Flange Trim: 4 in.
Flat Bar Shear Work Height: 36 in.
ANGLE SHEARING
Maximum Capacity 90 degrees: 5 in x 5 in x 1/2 in.
Maximum Capacity 45 degrees: 2-1/2 in x 2-1/2 in x 5/16 in.
Shearing with no material loss and minimum deformity.
Shear Blades: Four (4) usable edges.
Angle Shear Work Height: 43-3/4 in.
BAR SHEARING
Round Bar Max. Capacity: 1-1/2 in.
Square Bar Max. Capacity: 1-1/2 in x 1-1/2 in.
Five Cavity Round and Square Bar Shear Sizes:
Round 1/2 in , 1 in, 1-1/2 in
Square 3/4 in, 1-1/2 in.
Channel Shear Max. (optional): 5 in.
I-Beam Shear Max. (optional): 5 in.
Bar Shear Work Height: 48 in.
NOTCHING
Rectangular Notcher: 2 in x 3-1/2 in in 5/16 in material.
Electrical Interlock Safety Guard
Gauge Table with Stops: For precise positioning.
Notcher Work Height: 36-1/4 in.
OTHER STANDARD EQUIPMENT:
Five (5) Sets of Punches and Dies:
Punches: 9/16 in , 11/16 in , 13/16 in , 15/16 in , 1-1/16 in
Dies: 19/32 in, 23/32 in, 27/32 in, 31/32 in, 1-3/32 in
CPD Series 26 punch, 62 die
Magnetic Base Work Light
Adjustable Electric Back Gauge (36 in)
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Full-Control Foot Pedals
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz
Machine Net Weight: (D) 3,969 lbs.; (DX), 4,851 lbs.
Machine Dimensions: (D) 68 in L X31 in W X67 in H;
(DX) 82 in L X 31 in W X 67 in H
Two Hole Die Holder (Standard/Large)
To view more information on the SPARTAN 66 TON IW66D / IW66DX, HEAVY-DUTY, DUAL CYLINDER, COMPLETELY INTEGRATED IRONWORKER, including reviews, brand information, photos, videos, and more,
Fill in the form below to see Seller Info.