Description

7-1/2 H.P., 12 in THROAT (IW66D) - 20 in THROAT (IW66DX),

5 WORK STATIONS AND FULL CONTROL FOOT PEDAL

Capacities & Specifications Rated on 65,000 PSI Tensile

PUNCHING

Punch Pressure:  66 tons.

Punch Holder and Jog Mode

Punch Work Table: Includes back gauge and adjustable stops.

Adjustable See-Through Punch Stripper:  For fast and

easy setup.

Die Holder:  Adjustable in machined T-slots for quick punch            and die alignment.

Standard Tooling:  1-1/2 in in 3/8 in material.

CPD Series:  26 punch, 62 die.

Large Tooling:  2 in in 5/16 in material.

CPD Series: SP51P punch, SP80D die.

Optional Oversize Tooling:  6 in in 3/32 in material.

Maximum Channel Flange:  7 in.

Throat Depth:  12 in (D); 20 in (DX).

Stroke Length:  3-15/16 in.

Cycles per Minute in 3/4 in:  30.

Punching Station Work Height:  39-3/4 in.

FLAT BAR SHEARING

Flat Bar Shear Capacity:  14 in in 9/16 in.

Maximum Width x Thickness:  10 in 3/4.

Lower Blade:  Four (4) usable edges.

Support Table:  Includes guides for accurate positioning and

    indicator lines at 30 and 45 degrees left and right.

Adjustable Hold-Down:  Holds work piece securely in position

            when shearing.

Upper Shear Blade:  Provides for minimum distortion.  Two (2)

                                   usable edges.

Blade Length:  14-1/4 in.

Angle Flange Trim:  4 in.

Flat Bar Shear Work Height:  36 in.

ANGLE SHEARING

Maximum Capacity   90 degrees:  5 in x 5 in x 1/2 in.

Maximum Capacity   45 degrees:  2-1/2 in x 2-1/2 in x 5/16 in.

Shearing with no material loss and minimum deformity.

Shear Blades:  Four (4) usable edges.

Angle Shear Work Height:  43-3/4 in.

BAR SHEARING

Round Bar Max. Capacity:  1-1/2 in.

Square Bar Max. Capacity:  1-1/2 in x 1-1/2 in.

Five Cavity Round and Square Bar Shear Sizes:  

            Round    1/2 in , 1 in, 1-1/2 in

            Square   3/4 in, 1-1/2 in.

Channel Shear Max. (optional):  5 in.

I-Beam Shear Max. (optional):   5 in.

Bar Shear Work Height:  48 in.

NOTCHING

Rectangular Notcher:  2 in x 3-1/2 in in 5/16 in material.

Electrical Interlock Safety Guard

Gauge Table with Stops:  For precise positioning.

Notcher Work Height:  36-1/4 in.

OTHER STANDARD EQUIPMENT:

Five (5) Sets of Punches and Dies:  

Punches:  9/16 in , 11/16 in , 13/16 in , 15/16 in , 1-1/16 in

Dies:  19/32 in, 23/32 in, 27/32 in, 31/32 in, 1-3/32 in    

CPD Series 26 punch, 62 die

Magnetic Base Work Light

Adjustable Electric Back Gauge (36 in)

24 Volt DC Control Voltage

Scrap Boxes at Punching and Notching Stations

Adjustable Stroke Depth at Punch

Full-Control Foot Pedals

Two (2) Piece Gauging Table at Punch Station

Keyed Punch Holder for Shaped Tooling

Standard Voltage 230 Volt/460 Volt, 3 Phase, 60Hz

Machine Net Weight: (D) 3,969 lbs.; (DX), 4,851 lbs.

Machine Dimensions: (D) 68 in L X31 in W X67 in H;                                

                                     (DX)  82 in L X 31 in W X 67 in H

Two Hole Die Holder (Standard/Large)