Description

NEW SHARP MO# VH25 KNEE TYPE COMBINATION VERTICAL/HORIZONTAL MILL

GENERAL SPECIFICATIONS:

WORKING SURFACE OF TABLE ------------------ 10" X 56"
T-SLOTS, (NUMBER) SIZE -------------------- (3) 5/8"
LONG. TRAVEL OF TABLE --------------------- 36"
CROSS TRAVEL OF SADDLE -------------------- 16-1/2"
KNEE TRAVEL ------------------------------- 17"
RAM TRAVEL -------------------------------- 17-1/2"
SPINDLE CENTER TO COLUMN (MIN./MAX.) ------ 12 3/16" - 30"/16"
SPINDLE NOSE TO TABLE (MIN./MAX.) --------- 5-5/16" - 23"
FEEDS & RAPID:
LONG. FEED ------------------------------- (12) 7/8 - 27 IPM
LONG. RAPID ------------------------------ 82-1/2 IPM
HEAD:
TILT - FRONT TO BACK ---------------------- 45 DEGREES
SWIVEL - LEFT AND RIGHT ------------------- 90 DEGREES
QUILL (VERTICAL):
POWER FEEDS, IN./REV. --------------------- 0.0015, 0.003. 0.006
DIAMETER ---------------------------------- 3.5"
TRAVEL ------------------------------------ 5.3"
POWER FEEDS, IN./REV. --------------------- 0.015, 0.003, 0.006
SPINDLE (VERTICAL:
TAPER ------------------------------------- NST 40
MOTOR, 230V/460V/60 HZ./3 PH. ------------- 4 H.P.
SPEEDS, INFINITELY VARIABLE --------------- 60 - 4500 RPM
SPINDLE (HORIZONTAL):
TAPER ------------------------------------- NST 40
MOTOR ------------------------------------- 5 H.P.
SPEEDS ------------------------------------ (6) 80 - 1350 RPM
OVERALL WIDTH X DEPTH X HEIGHT ------------ 85" X 74" X 90"
APPROXIMATE NET WEIGHT -------------------- 3000 LBS.
STANDARD EQUIPMENT:
CHROMED TABLE AND SADDLE WAYS AND GIBS
DOUBLE FAN COOLING ISYSTEM IN HEAD, CUTLER-HAMMER ON/OFF
SWITCH, ONE SHOT LUBE, FRONT AND REAR SADDLE WAY COVERS,
TOOLBOX
STANDARD FEATURES:
WIDE 24" SADDLE PROVIDES EXTRA TABLE SUPPORT
CHROMED TABLE AND SADDLE WAYS AND GIBS
MEEHANITE CASTINGS
CHROME PLATED SPINDLE MOTOR SHAFT
DYNAMICALLY BALANCED VARIABLE SHEAVE PULLEY