Description

Description & Specifications

OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $89,500.00

HMC Stock No. 18321-P
Machine Serial No. 118029
Machine Model No. GA26-T
New Date: October 2005

Maximum Grind Diameter: 7.87"
Maximum Distance Between Centers: 25.60"
Maximum Workpiece Weight: 110 Lbs.
Swing Over Table: 12.99"
Wheel Travel X Axis: 16.54"
Maximum Wheel Size: 24" x 10" x 5.9"
Wheelhead Speed Range: Infinitely Variable 106.30 IPM
Wheelhead Motor: 10 HP
Wheehead Feed Motor: 3 HP
Sept. 2018, Workhead was Disassembled, Cleaned and
Reassembled with New Bearings, Seals and Belts
Saddle Feed Motor: 3 HP
Workhead Speed: Infinitely Variable 650 RPM
Workhead Motor: 3 HP
Workhead Tapered Bore: #4 Morse Taper
Tailstock Quill Travel: 1.97", 3.15"
Tailstock Taper: #4 Morse

EQUIPPED WITH:
CNC Control: Okuma OSP-U10G
Swing Out Part Gauging System with (3) Selections: Work Location,
Gauge 2 and Gauge 3
Over the Wheel Power Wheel Dresser
Grinding Wheel Lifter Unit
Jib Crane Mounted to Machine, 485 Lb. Capacity with Manual Chain Hoist
Rear Mounted Coolant System with Magnetic and 30" Wide Continuous
Fabric Filters
Sludge Cart
Door Interlock Switch for: Enable and Disable
NC Panel Switch for: Edit Lock – Lock – Unlock
3-1/2" Floppy Disc Backup of Software Discs
Pulse Generator
RS232-C 25 Pin Port
Hard Way Covers
Full Load Amps 75.1 / 34.4
30 KVA Electric Transformer, 3 Phase, 60 Hz
Primary Input: 200-240-380-415-440-480 Volts
Secondary: 200-240 Volts
Machine is Wired for 3 Phase, 60 Hz, 480 Volts

DIMENSIONS:
Overall Machine Size: 99" LR x 97" FB x 101" High x 13,000 Lbs. Approx.
(Height is to Top of Jib Crane Post with Machine on 4" Blocks)
Coolant System: 61" x 47" x 29" High
Transformer: 20" x 22" x 23" High
(2) Small Hydraulic Units: 25" x 14" x 23" High Each