OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $89,500.00
HMC Stock No. 18322-P
Machine Serial No. 118028
Machine Model No. GA26-T
New Date: October 2005
Maximum Grind Diameter: 7.87"
Maximum Distance Between Centers: 25.60"
Maximum Workpiece Weight: 110 Lbs.
Swing Over Table: 12.99"
Wheel Travel X Axis: 16.54"
Maximum Wheel Size: 24" x 10" x 5.9"
Wheelhead Speed Range: Infinitely Variable 106.30 IPM
Wheelhead Motor: 10 HP
Wheehead Feed Motor: 3 HP
Saddle Feed Motor: 3 HP
Workhead Speed: Infinitely Variable 650 RPM
Workhead Motor: 3 HP
Workhead Tapered Bore: #4 Morse Taper
Sept. 2018, Workhead was Disassembled, Cleaned and
Reassembled with New Bearings, Seals and Belts
Tailstock Quill Travel: 1.97", 3.15"
Tailstock Taper: #4 Morse
EQUIPPED WITH:
CNC Control: Okuma OSP-U10G
Swing Out Part Gauging System with (3) Selections: Work Location,
Gauge 2 and Gauge 3
Over the Wheel Power Wheel Dresser
Grinding Wheel Lifter Unit
Jib Crane Mounted to Machine, 485 Lb. Capacity with Manual Chain Hoist
Rear Mounted Coolant System with Magnetic and 30" Wide Continuous
Fabric Filters
Sludge Cart
Door interlock Switch for: Enable and Disable
NC Panel Switch for: Edit Lock – Lock – Unlock
3-1/2" Floppy Disc Backup of Software Discs
Pulse Generator
RS232-C 25 Pin Port
Hard Way Covers
Full Load Amps 75.1 / 34.4
30 KVA Electric Transformer, 3 Phase 60 Hz
Primary Input: 200-240-380-415-440-480 Volts
Secondary: 200-240 Volts
Machine is Wired for 3 Phase 60 Hz, 480 Volts
DIMENSIONS:
Overall Machine Size: 99" LR x 97" FB x 101" High x 13,000 Lbs. Approx.
(Height is to Top of Jib Crane Post with Machine on 4" Blocks)
Coolant System: 61" x 47" x 29" High
Transformer: 20" x 22" x 23" High
(2) Small Hydraulic Units: 25" x 14" x 23" High Each
To view more information on the OKUMA CNC ANGLE HEAD CYLINDRICAL GRINDER, including reviews, brand information, photos, videos, and more,
Fill in the form below to see Seller Info.