Description

Description & Specifications

34" X 160" MAZAK GAP BED ENGINE LATHE

PRICE: Loaded on Truck, Our Warehouse, York, PA   $17,500.00

HMC Stock #19062-P

Machine Serial No.: 35165
Machine Model No.: Heavy Duty Mazak 34
New Date: 1979
Made in Japan by Yamazaki Machine Works
Factory Support: Mazak Corporation, Florence, KY

Swing Over Bed Ways: 35"
Swing Over Cross Slide: 24-3/4"
Swing in Gap: 44-1/2"
Gap Length from Face of Chuck: 11"
Spindle Thru Hole: 4-1/8"
Spindle Nose Type: D-11 Camlock
(16) Spindle Speeds: 12 to 1200 RPM
Tailstock Quill Taper: #6 Morse
Headstock Taper: # 6 Morse
Tailstock Quill Diameter: 3-15/16"
Tailstock Quill Travel: 11-13/16"

CARRIAGE FEEDS
(80) Longitudinal Fine Feeds: 0.0024" to 0.0337" Per Revolution
(30) Longitudinal Coarse Feeds: 0.0385" to 0.2694" Per Revolution

THREADS
(40) Whitworth Fine Threads: 2 to 28 TPI
(16) Whitworth Coarse Threads: 5/8" to 8" TPI
(31) Metric Fine Threads: 1 to 14 MM Pitch
(20) Metric Coarse Threads: 15 to 200 MM Pitch
(25) Module Fine Threads: 1 to 14 M
(14) Module Coarse Threads: 16 to 56 M
(22) D.P. Fine Threads: 2 to 28 D.P.
(5) D.P. Coarse Threads: 3/4" to 1/2" D.P.

EQUIPPED WITH:
28" Cushman 4 Jaw Chuck with 2 Piece Hard Reversible Jaws
(1) Chuck Wrench
(1) 20" Capacity Roller Type Steady Rest
(1) 10" Capacity Roller Type Steady Rest
2-Speed Tailstock Quill Hand Crank
Trav-A-Dial Unit on Carriage
Quick Change Tool Post - No Tool Holders
Taper Attachment (Missing Bed Clamp Assembly)
(3) Removable Chip Pans
Hard Bedways in Good Condition
4-Way Rapid Traverse to Carriage and Cross Slide
Adjustable Carriage Feed Kick Out System
Designed for But Coolant Pump is MISSING
MISSING: Feeds and Threading Charts
20 HP Main Motor, Wired for 3 Phase, 60 Hz, 230/460 Volts
Overall Size: 241" LR x 77" FB x 70" High x 14,300 Lbs.