Description

18" X 72" LANDIS UNIVERSAL CYLINDRICAL GRINDER

PRICE: Loaded on Truck, Our Warehouse, York, PA …… $29,500.00

Stock # 13086

Serial # 891-13

New 1/1987

Model # 3RH Universal

Swing Over Table: 19-1/2"

Maximum Distance Between Centers: 74"

Grinding Wheel Size: 14" x 1-1/2" x 5" Bore
Table Swivels: Front and Back 5 Degrees / 15 Degrees (1"/3" per foot)
Wheelhead Can Swivel Up to 90 Degrees and is Repositionable on a Secondary Slide
Wheelhead Can Be Setup for Compound Angles or Steep Angle Without
Dressing an Angle on the Grinding Wheel
Variable Hydraulic Table Traverse Speed Rate: 2 to 240 IPM
Variable Table Tarry at Each End of Stroke
No Plunge Grinding Cycle

EQUIPPED WITH:
Live and Dead Spindle Type Workhead
Workhead Swivels Up to 90 Degrees
Workhead Spindle Nose Taper: A2-6
Workhead Spindle Internal Taper: #14 Jarno
Workhead Motor is 3/4 HP DC with VEE-ARC Variable Speed Drive
Workhead Speed Range: 25 to 125 RPM Low Range, 50 to 100 RPM High Range
Workhead Speed Range Change Via V-Belt Position Change
Quick Acting Lever Type Adjustable Tailstock Quill
Swing Down Internal Grinding Spindle Assembly
(1) Wheel Mounting Hub
(1) Table Mounted Wheel Dresser with Diamond
(2) Dead Type Work Centers
(2) Adjustable Table Traverse Stops
(2) Plain Adjustable Work Supports
(1) 10" Cushman 4-Jaw Chuck for Workhead (No Wrench)
(1) 12" Diameter Face Plate
(1) 6" Diameter Chuck with #14 Jarno Taper Shaft
(1) Adjustable Center Rest for Long Work Pieces Without Center Holes 1" to 7" Dia. Capacity
(1) Adjustable Work Rest with 1/2" to 7" Dia. Capacity
Built in Coolant Sump and Coolant Pump
Parts and Operations Manuals
Foundation Drawings
Assorted Splash Guards
Assorted Work Driver Dogs
Hydraulic and Electrical Schematics
Free Standing Electrical Panel
Wheel Balancing Stand with Arbor
Grinding Head Wheel Guard
Hard Sliding Table Way Covers
Bijur One Shot Lubrication System
5 HP Main Grinding Head Motor
1/3 HP Coolant Pump Motor
1/4 HP Spindle Lubrication Motor
2 HP Hydraulic Pump Motor
2 HP Carriage Lubrication System
5 HP Internal Grinding Spindle Motor
44.4 Full Load Amps at 230 Volts, 3 Phase, 60 Hz

Machine Overall Size: 103" L-R x 78" F-B x 73" High on 4" Blocks
Electrical Panel: 18" x 42" x 67" High