Model: 1000 HC
Year: 2000
Stock #: 24950
Type: Spiral Bevel Gear Generators, GEAR GENERATORS, BEVEL, SPIRAL/HYPOID
Manufacturer: Used GLEASON PHOENIX Machines
Highlights:
Fanuc 150MB
UMC Software
Dry Cutting
Wet Cutting
High Speed Spindle
Chamfer Unit
Coolant System
Chip Conveyor
Dry Shrouds
Change Gears
Auto Load
ABB Robot
Gage Station
MACHINE SPECIFICATIONS:
INCH
METRIC
Year 2000
Control Manufacturer Fanuc
Extreme Ratio 10:1
Maximum Face Width 6"
Maximum Diameter Gear 39.4"
Manufacturer GLEASON PHOENIX
Gleason took the initiative to become the leading expert on axle noise, vibration, and harshness, testing vehicles to understand axle noise and what their machines could do about it. The result is the combined innovation of UMC Ultima for quieter gears and PowerDryCut for lower costs. UMCUltima makes use of CNC to program a change in gear tooth geometry, resulting in the fabrication of much quieter gears. Combined, these innovations produce a hypoidal gear cutting system that requires less investment, less manufacturing space, and produces quieter axle gear sets at a lower cost.
Specifications:
Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1
Full Depth:Max: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm)
Face Width:Max: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm)
Range of Tooth Numbers: 1-300 Inclusive
Gear Pitch Diameter, Maximum: 1000 mm (39.37")
Cutter Size, Maximum: 18" (diameter) Face Milling
Cutter Size, Maximum: 350 mm (radis) Face Hobbing
Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg.
Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed)
A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM
B-Swinging Base: 0 to 30 deg./sec, N/A
C-Cutter: 0 to 500 deg., Same
X-Horizontal: +/-305mm (+/-12")
Y-Vertical: +/-305 mm (+/-12")
Z-Sliding Base: -25/+700mm (-1/+28")
B-Root Angle: -5 Degree/+90 Degree
Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper)
Taper Per Foot:3/4", Same
Depth of Taper Front:6", 152.40 mm
Depth of Bore: 678 mm (26.7")
Diameter of Taper Bore: 140 mm (5.5")
Diameter Through Spindle of Hole:7.125", 180.98 mm
MACHINE DIMENSIONS:
Length x Width:233"x 209", 5920 mm x 5310 mm
Height: 129", 3280 mm
Weight: 65,000 lbs., 29,484 kg
