GEKA (NEW) MODEL HYDRACROP 110S UNIVERSAL
IRONWORKER WITH 5 WORK STATIONS
PUNCHING STATION
- 120 TON CAPACITY
- 1-1/2" DIAMETER IN 3/4"
- 1-1/4" DIAMETER IN 1"
- 1-9/16" DIAMETER ROUND PUNCH
- 12" THROAT
- 45-1/2" WORKING HEIGHT
- 2-STAGE FOOT PEDAL (LOW PRESSURE ON 1ST STAGE)
- EMERGENCY STOP
- PUNCHES
8/31 FOR UP TO 1-3/16" DIAMETER
8/32 FOR UP TO 1-1/4" DIAMETER
8/40 FOR UP TO 1-9/16" DIAMETER
- DIES
NO 5 FOR UP TO 1-1/4" DIAMETER
NO 8 FOR UP TO 1-9/16" DIAMETER
- WHEN PUNCHING LARGE U, I AND T PROFILES
CAN REMOVE GOOSE NECK DIE BLOCK WITH SUPPORTS
CAPACITY IS REDUCED TO 60 TONS
- GAUGING TABLE WITH INLAYED INCH SCALES
WITH FRONT TO BACK ADJUSTMENT ON ROLLERS
- PUNCH SLAG BUCKET
- FULL STROKE OR JOG MODE FOR INCHING OF THE TOOL
W/AUTO RETURN WHEN LOWER LIMIT SWITCH IS TRIGGERED
- GIBBED AND GUIDED PUNCHING CYLINDER FOR TOOL
ALIGNMENT
- QUICK-CHANGE PUNCH HOLDER
- OFF-SET PUNCH AND DIE HOLDER
OFFSET 1/2" FROM CENTER LINE
13/16" DIAMETER ROUND HOLE
25 TON MAXIMUM
REQUIRES # P9 PUNCHES AND # 1 DIES
FLAT SHEARING STATION
- 38-3/16" WORKING HEIGHT
- 24" BLADE
- 24" X 5/8", 16" X 3/4" OR 12" X 1" CAPACITY
- MITERING GRADUATIONS INSCRIBED IN THE TABLE
- 2 ADJUSTABLE GUIDE BARS
- MANUAL HOLD DOWN WITH ACCESS FOR SHEARING LEGS
OF ANGLES
ANGLE SHEARING STATION
- 198 TON CAPACITY
- 46-1/2" WORKING HEIGHT
- 6" X 6" X 1/2" CAPACITY
- ANGLES AT 45 DEG MITER (LEG IN) 3" X 3" X 5/16"
- CAN SHEAR BOTH LEGS OF ANGLE AT THE SAME TIME
- "NON-DEFORM CUT" WITH NO MATERIAL LOSS
- VERTICAL AND HORIZONTAL GUIDES FOR SQUARE CUTS
SECTION SHEARING STATION
- 117 TON CAPACITY
- BLADES FOR 3" X 4.1 LB & 4" X 5.4 LB CHANNELS
- 9/16", 3/4", 1", 1-3/16" ROUND OPENINGS
- 9/16", 1", 1-3/16" SQUARE OPENINGS
- 6" X 10 LB CHANNEL
- ROUNDS AND SQUARES UP TO 2"
NOTCHING STATION
- 2" WIDE
- 3-1/2" DEEP
- 1/2" THICK
- 38-3/16" WORKING HEIGHT
- GAUGING TABLE WITH INLAID INCH SCALES
- FRONT TO BACK MOVEMENT ON ROLLERS
- SLIDING GUARD WITH KEYED LOCK OUT FOR SAFETY
- EMERGENCY STOP
FEATURES
- 2-CYLINDER OPERATION AND 2 REMOTE FOOT PEDALS
SIMULTANEOUS SHEARING AND PUNCHING
- MAGNETIC WORK LIGHT
- 40" AUTOMATIC CUT-TO-LENGTH STOP
- 10 SETS (YOU CHOOSE) FROM 1/8" TO 1-1/4" ROUND
WITH 1/32" CLEARANCE
- TOOL KIT WITH OPEN-END WRENCH, SPANNER WRENCH,
HEX KEYS, GREASE GUN, PUNCH HOLDERS, DIE REDUCER,
AND DIE RISER
- MANUAL AND PARTS LIST
12.5 HP, 3 PHASE, 220 VOLTS
OPTIONS AVAILABLE - PRICE ON REQUEST
- 24" PUNCHING THROAT
- 4 AND 6" PUNCH ATTACHMENTS
- TRIANGULAR NOTCHER WITH GAUGING TABLE
- PIPE NOTCHER
- NOTCHER PUNCHING ATTACHMENT WITH GAUGING TABLE
To view more information on the GEKA (NEW) MODEL HYDRACROP 110S UNIVERSAL IRONWORKER WITH 5 WORK STATIONS, including reviews, brand information, photos, videos, and more,
Fill in the form below to see Seller Info.