MODEL GA-34F

DISTANCE BETWEEN CENTERS ------------------ 350 MM  ( 13.78" )

SWING OVER TABLE -------------------------- 330 MM  ( 12.99" )

MAXIMUM GRINDING DIAMETER ----------------- 300 MM  ( 11.8" )

MAXIMUM GRINDING WHEEL WIDTH -------------- 2.95"

MAXIMUM WORKPIECE WEIGHT ------------------ 330 LBS.

  ( SUPPORTED BY CENTERS )

GRINDING WHEEL:

  GRINDING WHEEL SIZE, OD X W X ID -------- 17.9" X 2.95" X 5"

  WHEEL SPINDLE SPEEDS ( VARIABLE ) ------- 1409 - 1868 RPM

  MAXIMUM WHEEL PERIPHERAL SPEED ---------- 2700 M/MIN ( 8859 FPM )

WHEELHEAD X-AXIS:

  TRAVEL ---------------------------------- 370 MM ( 14.57" )

  AUTO-INFEED SPEED ----------------------- 0.0012 - 6.000 MM/MIN

  AUTO-INFEED SPEED ----------------------- 0.000047 - 236.22 IPM

  POSITIONING SPEED ----------------------- 16,000 MM/MIN ( 629.92 IPM )

TABLE Z-AXIS:

  TRAVEL ---------------------------------- 550 MM ( 21.65" )

  AUTO-INFEED SPEED ----------------------- 0.0006 - 6000 MM/MIN

  AUTO-INFEED SPEED ----------------------- 0.000024 - 236.22 IPM

  POSITIONING SPEED ----------------------- GA: 12,000 MM/MIN ( 472.44" )

WORKHEAD C-AXIS:

  CENTER HOLE ----------------------------- MT NO. 5

  WORK SPINDLE SPEED, VARIABLE ------------ 0 - 600 RPM

FOOTSTOCK:

  CENTER TAPER ---------------------------- MT NO. 5

  TAPER ADJUSTING AMOUNT ( MANUAL ) -------  0.08 MM ( 0.0031" )

  AUTO STROKE ----------------------------- 70 MM ( 2.76" )

WHEELHEAD DRIVE --------------------------- 10/7.5 HP A.C.

WORKHEAD DRIVE ---------------------------- 3.2 HP A.C.

EQUIPPED WITH ---

OSP5020G CONTROL WITH 160M TAPE STORAGE

RS232 PORT

COLOR MONITOR WITH GRAPHICS

IN/MM SWITCHABLE

INTERACTIVE GAP

CYCLE TIMER REDUCTION

USERTASK2

HYDRAULIC FOOTSTOCK

HIGH ACCURACY SERVOS

DROP DOWN LOCATOR GAUGING

WORKHEAD MOUNTED DIAMOND ROTARY DRESSER

Weight : 15400

Dimension (IN) : 112-108-086