Pumps are seal-less and also stainless steel.
Central, control station.
Variable speed, 1-12 ft./min.
Access doors to spray/dry zones.
Extra protection against solution crossover.
Modular construction.

C-24-S3:
Recirculated Spray Module with a 36" spray zone 68" canopy length, 104" overall (when stand-alone module) 5 HP pump/275 gal.
Gas heat

C-24-S5:
Recirculated Spray Module with 60" spray zone 92" canopy length, 128" overall (when stand-alone module) 7.5 HP pump/400 gal.
Gas Heat
C-24-DH:
Hot air blow-off module with four (4) adjustable, overhead air knives and two (2) fixed, bottom air knives 72" long, insulated canopy... 108" overall (when stand-alone module) IO HP centrifugal blower, 45 kW electric heat, 1,900 CFM rated
72" long insulated canopy construction
15,000 FPM (nominal) air velocity at air knife discharge Total of six (6) air knives that are located on the top and bottom of the conveyor Top air knives can be moved to optimize performance with no tools (3" to 19.25" from belt) in 3.25"
intervals.
Electric heat.
Air temperature is monitored and controlled with a digital setpoint controller. Nominal operating temperature up to 250 deg F. Large front access door (19" x 40") to access inside of module. Utilities:
460 Volt, 3 Phase, 60 HZ.
Natural Gas: Max 380 cubic ft/hr, 1,000 BTU/cu.ft.

Construction:
Tanks: 12 Ga.304 Stainless Steel Canopies: 14 Ga.304 Stainless Steel Frame under Tanks: 7 Ga. Painted Carbon Steel Exterior Plumbing: Stainless Steel Interior Plumbing: Stainless Steel Recirculating Spray Manifolds: Stainless Steel Recirculating Pumps: Stainless Steel Conveyor Components: Stainless Steel
Product Clearance:
24" wide by 16" high.
Control:
All components through one controller.

Venting:
6 in diameter venting on first and last wetted stations to connect to your shop ventilation system.

Footprint:
86 in Wide X 89 in High X 270 in Long

Hours: 960

All specifications subject to verification. Power conveyors on either end not included.