Description

'

Specifications:

• Working deburring capacity: 18 Cubic Feet
• Length (overall including electric control box): 80\"
• Width (overall): 60\"
• Height (overall): 54\"

Bowl:

• Diameter: 60\"
• Cross Section: 17-1/2\" (Diameter)
• Lining (Thckness of Polyurethane): 1\"

Comments:

• New Style Almco Vari-Drive System
• Center Dome Feature
• Pedestal mounted control panel
• Tub 17,5\" cross section
• Bowl Diameter 60\"
• The machine has been cleaned and is ready to be primed and painted

Power Unit:

• 10 hp, 1800 RPM totally enclosed, ball bearing motor for 230/460 volt (please
• specify voltage), 3 phase, 60 cycle operation driving a variable pitch pulley.
• The pulley is connected to two flat V-belts in a companion sheave on the
• vibratory mechanism. Frequemcy of vibration is variable from 900 to 1400
• cycles per minute by turning the handwheel on the motor base resulting in a
• change in pulley pitch diameter. All moving drive componensts are well
• guarding for operator protection.

General:

• This High-Energy \"OR\" Series Machine is composed of the following basic
• compoents:
• (1) The support base and framework
• (2) The Drive Unit
• (3) Almco\'s Natural Contour Molded Urethane Lined Tube
• (4) The Vertical Shaft Vibrator
• (5) The Electrical Control Enclosure

Description:

• Discharge of parts and media from the round bowl is accomplished with a plug
• type door with molding lining at one end of the bowl near the bottom periphery.
• The door is equipped with a quick-acting, overcenter cam lock that assures a
• positive seal when closed during processing. When the plug door is removed,
• the parts and media flow from the bowl onto a heavy gauge steel chute that channels them to a
• collection pan or conveyor.
• The round bown is supported on the stationary framework of the machine on
• heavy coil wound springs that serve to supplement the finishing motion of the
• bowl and at the same time to eliminate finishing vibration from the stationary
• framework.
• Finishing motion of the round bowl is accomplished by adjustable counterweights
• on the output shaft of a heavy duty vibratory mechanism equipped with self-aligning spherical
• roller bearings that are mounted in a precision machined housing. The shaft of
• the vibratory mechanism is driven by two V-belts running in a deep groove, off-set
• sheave to eliminate shock loading and whip in the V-belts. A manual lubrication
• system is provided to allow lubrication into the bearings of the vibratory
• mechanism from the stationary base.
• The machine is equipped with a water system designed to inject water into the
• processing tub. The tub is equipped with two perforated (replaceable) molded
• drain plates in the tub bottom to allow continuous flow of liquids in the vibratory
• tub.
• The electrical controls for the machine are in conformance to N.E.C. electirical
• specifications with the motor operating on either 230 or 460 volt current and with
• all operator controls on 110 volt current supplied by a transformer within the
• control box. All necessary controls for the machine\'s operation including
• Automatic Reset Timer (adjustable time range) are housed in one NEMA type 12
• panel enclosure mounted on a pedestal separate from the machine to allow
• positioning the enclosure as needed.
'