Description

ACRA MODEL LCTM1 VERTICAL KNEE MILL

FEATURES

ISO 9002 CERTIFIED MOTOR SHAFT END BALL BEARING

MEEHANITE (R) CASTING SUPPORT (NOT REQD ON EVS)
DUAL HEAD COOLING FANS ONE SHOT LUBRICATION SYSTEM
ABEC-7 ANGULAR CONTACT HAND SCRAPED SADDLE AND KNEE
SPINDLE BEARINGS TABLE AND SADDLE BACKLASH IS
CHROMED AND GROUND QUILL CONTROLLED BY DOUBLE NUT DESIGN
CHROMED MOTOR SHAFT PATENTED KNUCKLE DESIGN USES
GREASE FITTINGS ON MOTOR SHAFT 6 T-BOLTS, 3 PER SIDE,
FOR MOTOR PULLEY SECURING THEM FROM THE OUTSIDE
STANDARD EQUIPMENT
BOXWAYS ON SADDLE AND COLUMN FRONT & REAR WAY COVERS
HARDENED AND GROUND TABLE SURFACE ONE SHOT LUBE
26" WIDE SADDLE TOOL KIT
SPECIFICATIONS
TABLE WORKING SURFACE --------------------- 10" X 50"
TABLE T-SLOTS - NUMBER AND SIZE ----------- 3 SLOTS, 5/8"
26" WIDE SADDLE
TRAVELS (X AND Y) ------------------------- 35" X 16.3"
QUILL TRAVEL ------------------------------ 5"
RAM TRAVEL -------------------------------- 18.5"
KNEE TRAVEL ------------------------------- 15.3"
THROAT DISTANCE --------------------------- 9.8" TO 28.3"
SPINDLE GAGELINE TO TABLE TOP ------------- 1.6" - 16.9"
SPINDLE MOTOR ----------------------------- 3 HP
WIRING VOLTAGE ---------------------------- 220V/440V
SPINDLE NOSE TAPER ------------------------ R-8
SPINDLE VARIABLE SPEED DRIVE -------------- 60 - 4500 RPM
QUILL FEED 3 SPEED (IPR) ------------------ .0015, .003, .005
ACCURACY ---------------------------------- 0.0002" TIR
HEAD TILT (RIGHT TO LEFT) ----------------- 90 DEGREES
HEAD TILT (UP AND DOWN) ------------------- 45 DEGREES
FLOOR AREA (W x D x H) -------------------- 70" X 75" X 88"
WEIGHT ------------------------------------ 3,000 LBS
INVESTMENT

STOCK# 71515