Description

ACRA 1440C PRECISION GAP BED ENGINE LATHE CLAUSING COLCHESTER TYPE WITH TOOLING TAIWAN NEW

Specifications:

Capacity: 14 in/20 in x 40 in
Swing over Bed: 14-1/8 in
Distance Between Centers: 40 in
Swing over Cross Slide: 8.625 in
Swing over Gap: 20.875 in
Width of Bed: 9 in
Spindle Nose to Gap: 6.375 in
Cross Slide Travel: 7 in
Compound Travel: 4 in
Compound Slide Travel: 4 in
Spindle Nose: D1-4
Spindle Bore: 1.625 in
Spindle Taper: MT #5
Spindle speeds: (8) 80-2,000 RPM
Tail-stock Taper: MT #3
Tail-stock barrel travel: 4.5 in
Tail-stock barrel diameter: 1.875 in
Inch Threads: (45) 2 to 72 TPI
Metric Threads: (39) 0.2 to 14 mm
Modular Pitches: (18) 0.3 to 3.5 MP
Diametrical Pitches: (21) 8 to 44 DP
Longitudinal Feed Range: 0.002 to 0.067 IPR
Cross Feed Range: 0.001 to 0.034 IPR
Number of Feed selections: 17
Coolant Motor size: 0.125 HP
Spindle Motor size: 5 HP
Voltage: 230/460V, 3-PH, 60 cycle

Standard Equipment:

* Allen-Bradley controls.
* Signature South Bend three V-way bed.
* 6 in 3-Jaw scroll chuck w/ D1-5 back plate
* 8 in 4-Jaw independent chuck D1-5
* 10 in Face plate D1-4
* Safety Chuck Guard with microswitch shut-off
* Steady Rest with roller tips
* Two MT #3 Dead Centers
* Threading Dial Indicator
* Six Leveling Pads
* NTN Japanese Spindle Bearings
* 4-Way Tool Post
* Halogen lamp
* Complete Coolant system
* Micrometer Carriage stop
* Spindle Sleeve MT #5/MT #3
* Full Length Back Splash
* Foot Brake
* Front Removable pull-out Chip Tray
* Tool set and box
* Spindle Nose to Gap: 6.375 in
* Follow rest
* Operation manual and parts list EXTRA LONG SADDLE W/ GIBS