Description:
STOCK No. 9990
46 in BULLARD DYNATROL HI-COLUMN VERTICAL TURRET LATHE
Serial No. 32949 New 1975
SPECIFICATIONS:
Capacity: Swing With Side Head Above Table 49 in
Swing With Side Head Below Table 58 in
Height Under Cross Rail 64 in
Height Under Turret Face 74-3/8 in
Vertical Travel of Turret Head 26 in
Horizontal Travel of Turret Head 34-1/4 in
Turret Head Toolpost Holes 2-3/4 in
Turret Head Swivel Either Side of Center 30 Deg
Vertical Travel Of Side Head 62-3/4 in
Horizontal Travel of Side Head 23-3/4 in
Ram Cross Section 9 in
Toolpost Hole in Ram 3 to 3/8 in
Vertical Travel of Ram Head 42 in
Horizontal Travel of Ram Head 30-1/4 in
Ram Head Swivel Either Side of Center 30 Deg
Speeds: (20) 8.5 - 313
Feeds: Infinitely variable .001 in to .250 in/rev
Manual Indexing Five Sided Turret Head
Combinations: Manual Indexing Four Sided Side Head
Left Hand Ram Head with Built-in 5 HP Setco Grinding Spindle
Machine Automatic Lubrication
Features: Compact Unified Remote Control Pendant for all
Machine Functions
Variable Rapid Traverse to Max of 9 Ft Per Minute
EQUIPPED WITH:
Hardened and Ground Ways on Cross Rail, Turret, Ram Slide & Swivel
Setco 5 HP Grinding Spindle - Integral to Ram Head
TDA (Threading, Drum Scoring and Angular Turning Attach. on TH & RH
Hardened Steel Cross Rail Plates
(3) Pistol Grip Pendant Controls 46 in 4 Jaw Chuck
50 HP Main Motor 5 HP Rail Elevation
Approx Height With Rail Up, Pendant Up, Ram Up 228 in
Dimensions: Width 145 in
Front to Back 125 in
Approx Weight: 48,000 Lbs