Description

Machine Specifications:
Model: 3718LVPLUSII-40CF-R
Machine structure: Precision Rack & Pinion, direct drive
Travel drive method: X, Y,Z simultaneous 3 axes
Control method: X, Y, and Z simultaneous 3 axis control
X-Axis stroke: 145.7"
Y-Axis stroke: 72.8"
Z-Axis stroke: 3.54"
Maximum work piece size: 144.1" x 72.0"
Maximum processing feed rate: 1180 inches per minute
Maximum work piece weight: 2200 lbs.
Table pass height: 33.5"
Rapid travel speed: 3345 single axis, 4730 simultaneous, inches per minute
Minimum command input: .001mm/.0001"
Drive motor type: Intelligent AC servo
Machine unit dimensions: 469.6" (W) x 90.6" (H) x 196.1" (D)
Total system weight: 28,910 lbs.
Pallet change time: Approximately 25 seconds
Pallet changer weight: 6000 lbs.
Pallet changer drive mechanism: Chain
Installation dimensions: 549.6" x 243.6"
Floor space requirement: 930 sq. ft.
Electrical requirements: 208 VAC +/- 5%, 3 Phase, 60 Hz
Motion system, CNC controller: 81 KVA (Total machine usage)
Laser resonator: 231 (Full load Amps)
CNC Controller specifications:
Model: LC20BP2
Type: Self-contained-simple dust proof design (mounted on processing machine)
CPU: 64 Bit
Display unit: 10.4" TFT Color LCD Touch Screen
Hard disc drive capacity: 2.0 GB
Program memory capacity: Standard 5,000m/Approximately 2 MB; number of

register-able programs: 400
CO2 Laser control
Power control: Output power, frequency, duty
Operation control: Shutter open/close, beam on/off, laser gas chance, etc.
Processing machine control
Drive method: X, Y, Z (simultaneous control)
Position detection method: Encoder
Minimum command unit: 0.001mm / 0.0001"
Program Input method: 3,5" Floppy/ computer link/ Ethernet LAN
Operation method: Memory operation or HD direct operation
Laser resonator specifications:
Model: Mitsubishi 40CF-R
Excitation method: 3-axis cross flow, SD
Control method: Power feedback
Power stability: +/- 1%
Beam mode: Low-order (Main component TEM01)
Beam outer diameter: 1.02"
Beam divergence: Approximately 3.5 or less (total angle) MRAD
Wave length: 10.6 microns
Frequency setting range: 10~3000 Hz
Duty range: 0~100 % adjustable
Output power range: 0~100 % of rating
Resonator unit dimensions (W x H x D )
Resonator unit weight: 4850 lbs.
Rated Output power: 4000 watts
Composition (CO2:CO:N2:He): 8:4:60:28
Consumption amount (liter/Hr): 3
Gas sealing time (Hr): 24 (during rated continuous oscillation)
Chiller unit specifications:
Model: thermal care model LXF series
Electrical requirements: 208 VAC +/1 10%, 3 phase, 60Hz; 42 KVA, 129 Full load