Description

Description & Specifications

30" X 200" SUMMIT ENGINE LATHE
PRICE: Loaded on Truck, Our Warehouse, York, PA …… $27,500.00

HMC Stock No. 18161
Machine Serial No. T-09-15
Machine Model No. 30-4X200
New Date: Unknown

Swing Over Bed: 33-1/4"
Swing Over Cross Slide: 23-1/2"
Swing In Gap: 43-1/4"
Length of Gap in Front of Face Plate: 13"
Length of Gap with Face Plate: 15"
Length of Gap: 19-1/4"
Weight Admitted Between Centers:
Without Steady Rest: 5,500 Lbs.
With (1) Steady Rest: 6,600 Lbs.

HEADSTOCK:
(16) Spindle Speeds: 14 to 1010 RPM
Hole Thru Spindle: 4-1/8"
Spindle Nose Type: D1-8 Cam Lock
Overall Length of Spindle: 33-1/2"
Type of Forward/Reverse Clutch: Mechanical Multi Disc with Electric Brake 

QUICK CHANGE GEARBOX:
(70) English Threads: 1/2 to 56
(61) Metric Threads: .5 to 56
(45) Module Threads: .25 to 14
(60) Diametral Pitch: 2 to 112
(70) Longitudinal Feeds: .0014 to .1664
(70) Cross Feeds: .0007 to .083
Leadscrew Diameter/Threads: 1-37/64" x 2 TPI

CARRIAGE & APRON:
Cross Slide Travel: 16-5/16"
Compound Rest Travel: 8-15/16"
Compound Rest Width: 6-5/8"
Graduation of Apron Handwheel: .010"
Travel of Carriage per Revolution of Handwheel: 1"
Graduation of Carriage Cross Slide Handwheel (Direct Reading): .001"
Travel of Cross Slide per Revolution of Handwheel: 0.4"
Height from Top of Compound to Centerline of Lathe: 2-7/16"
Speed of Power Rapid Traverse: 160 IPM
Type of Lubrication System: Plunger Type

TAILSTOCK:
Travel of Spindle Quill: 9-1/2"
Diameter of Spindle Quill: 3-11/32"
Tailstock Taper: #5 Morse
Tailstock Offset from Centerline Either Side: 7/8"
Tang Slot in Barrel: Yet
Type of Lubrication System: Oil Reservoir

EQUIPPED WITH:
Hardened and Ground Bed Ways in Very Good Condition
Taper Attachment Capacity: +/15 Degrees x 23" Long Travel
(1) 17" Roller Type Steady Rest (13-1/2" Max. Capacity)
(1) Follow Rest, Bronze Tips, Min./Max. Capacity: 1-1/2"/11-1/2"
(1) 12" Chuck, 3 Jaw with Hard Reversible Top Jaws
(1) 20" Chuck, 4 Jaw with Solid Reversible Jaws
(1) Chuck Wrench
(1) Adjustable Way Mounted Carriage Stop, 6 Position Turret Type
(1) OEM Factory Manual
(1) Dead Center and (1) Bull Nose Center
Auto Lubrication System to Carriage Bed Ways
4-Way Rapid Traverse of Carriage and Cross Slide 
Quick Change Tool Post with (5) Assorted Tool Holders
Rocker Arm Style Tool Post (NO Holders)
(3) Removable Chip Pans
Removable Bed Gap
Coolant Pump System Built into Chip Pan
Main Drive Motor: 15 HP
Coolant System Motor: 1/3 HP
Rapid Traverse Power: 1 HP
Presently Wired for 3 Phase, 60 Hz, 480 Volts
Overall Machine Size: 279" Long x 58" Wide x 69" High x 14,200 Lbs.