Description

Reference #: 7700

Machine Type: Drills

Year: 2017

Manufacturer: Tarus

Model: TPTCGD508SB CNC Gun Drill

Control: Tarus DHDM

Condition: Very Good

Under Power: Yes

Code: D4554

Specificaitons:

Droke Stroke (W-Axis), No Whip Guides: 93"

Drill Stroke with (3) Whip Guides: 81.4"

X-Axis Travel (Table): 114"

Y-Axis Travel (Vertical): 60"

Z-Axis Travel (Column In/Out): 46"

Work Table Size: 60" x 96"

T-Slots in Main Table (with Gutter for Draining): 7/8"

Table Capacity: 60,000 Lbs

Coolant System:

Coolant Pressure (Maxi Mum): 1,500 PSI

Coolant Pressure Pump Power: 20 HP Each

(2 Pumps total, data for a single pump): 0 - 40 G.P.M.

Coolant Volume (Servo Controlled): 0 - 40 GPM

Coolant Reservoir (Clean Tank): 700 Gallons

Coolant Reservoir (Discharge Tank): 250 Gallons

Coolant Recirculation Pump 5 HB: 75 GPM

Drilling: Capacity:

Max Gun Drilling (No Pilot): 2" Diameter

BTA/STS Drilling Diameter (No Pilot): 7.5"

BTS/STS with Pilot Hole: 2.22"

Main Spindle:

Spindle Power (40% Duty Cycle S6): 33.25 HP

Spinde Power (100% Duty Cycle 51): 22.79 HP

Spindle Speed Range: 0 - 3394 RPM

Spindle Maximum Torque: 0 - 272 Ft-Lbs

Drill Slide:

Drilling Feed Force: 7,723 Lbs

Drill Depth (3 Whip Guides): 87.45"

Drill Slide Travel (No Whip Guides): 93.45"

Auxiliary Spindle:

Spindle Power (40% Duty Cycle): 33.25 HP

Power: 22.7 HP

Speed Range: 0 - 3500 RPM

Max Torque: 13 Ft-Lbs

Stroke (In & Out): 10"

ANSI B 5.50 - 78, ISO 7388 12:

Tool Type: B

Taper: CAT 50

Filtration System:

Large Dual Inline Bag Flters

25 Micron then 19 Micron Filtration System

Auxiliary Spindle:

Milling, Thread Milling, Tapping, Counter Boring and Spot Facing

Equipped With:

BTS / STS Drills Capable of 2.5" Diameter Drilling

Chip Conveyor

Coolant Tank

Circular Interpolation

Comments:

Dual Spindles Are Side By Side, Spaced 12.5" Center To Center

Reducing Effective Travel To 101.5 (2578 Mm)

Footprint: 25 ft LR x 24 ft FB