Type: Vertical Machining Centers
Manufacturer: GANESH
Model: VFM-2818
Year: 2016
Stock #: 323179
Status: For Sale
Description:
Used GANESH VFM-2818 High-Speed Vertical Machining Center
New in 2016
Mitsubishi M830 Control with 2700 Block Look-Ahead
Good Condition
X 27.95 in
Y 17.716 in
Z 18.11 in
Power 15 hp
RPM 12,000 RPM
# ATC 24
Taper CAT # 40 (Big-Plus)
Table-W 16.53 in
Table-L 29.92 in
# Axis 3
Control CNC (Mitsubishi M830)
Dimensions 86 in x 81 in x 113 in(add 45 in for conveyor)
Weight 10,582 lbs
GEN MILL-2818 OEM TECHNICAL SPECIFICATIONS:
X-Travel 27.95 in 710mm
Y-Travel 17.716 in 450mm
Z-Travel 18.11 in 460mm
Spindle Nose to Table Surface 5.11 in to 23.62 in 150 to 600mm
Spindle Center to Z-axis way covers 17.71 in 450mm (throat dimension)
Max. Table Load 2,205 lbs. 1000 kgs load
SPINDLE
Spindle Motor S1/S2/S3=7.5/11/15kw 20-HP S3 power (15-HP 30-min. duty rated)
Spindle Speed Inline Direct-Drive 12,000rpm (15,000rpm optional)
Spindle Torque 50 ft-lb at 1,500 rpm
Tool Type CAT #40 Taper BT #40 optional
Spindle Runout 0.000040 in T.I.R.
Spindle Bearings - Front 95mm NSK 70BNR P4 class-7 bearings
Spindle Bearings - Rear 95mm NSK 70BNR P4 class-7 bearings
AXIS FEEDS
Rapid Traverse X, Y, and Z 1,417 IPM
Cutting Feed-rate 0.02 - 393 IPM 10m / minute
TOOL CHANGER
Tool Capacity (30+1) 30-Tool Twin-Arm Hi-Speed Tool Changer
Tool Shank CAT#40 Taper
Tool Change Time 1.7-sec. tool-to-tool
Maximum Tool Diameter / w/adjacent tool 5.90 in / 3.15 in 150mm / 80mm
Maximum Tool Length (from gage line) 11.81 in 300mm
Maximum Tool Weight 15 lbs. 7kg
Tool Selection / Tool Access Random access Bi-directional shortest path
Air Service Requirements 85 psi at 14-scfm
Electrical Requirements - connected load 220vac plus/minu 5 percent, 60-Hz 50-Amp Service 25 KVA
Coolant Capacity 68-gallons / 300 psi
Floor space requirements (W x D x H) 86 in x 81 in x 113 in 221 x 206 x 288cm
(add 45 in for conveyor)
Shipping dimensions (W x D x H) 97 in x 91 in x 101 in 246 x 229 x 256cm
Machine Weight 10,582 pounds 4,800 kg
Equipped With:
300 PSI THRU-TOOL COOLANT,
CHIP WASH-DOWN
CHIP CONVEYOR (right-hand exit),
MITSUBISHI M830 CNC CONTROL with HIGH SPEED 2,700 BLOCK LOOK AHEAD,
24 STATION SIDE-MOUNT ATC,
4th and 5th AXIS WIRING
RUGGED ROLLER WAYS,
DUAL CONTACT "BIG-PLUS" SPINDLE,
12,000 RPM DIRECT-DRIVE SPINDLE,
SPINDLE CHILLER
ALL RELATED MANUALS, DOCUMENTS, TOOLS, and ACCESSORIES for this machine.
To view more information on the 2016 GANESH VFM-2818 | VERTICAL MACHINING CENTER, including reviews, brand information, photos, videos, and more,
Fill in the form below to see Seller Info.