Description

Capacity:

• Swing over bed: 39.3\"
• Swing over carriage: 27.56\"
• Maximum bar capacity (2.95 in right spindle w/work ejector): 3.00 in
• Maximum turning diameter, main spindle: 29.9\"
• Max. weight (including chuck) chuck work/shaft work: 463 / 2,006 lbs.
• Maximum turning length: 60.6 in
• Distance between spindle noses: 72.2 in

Spindles:

• Chuck size: 10 in
• Spindle speed: 4,000 RPM
• Spindle nose: A2-8
• Left spindle drawtube ID: 3.03 in
• Right spindle drawtube ID: 2.95 in
• Spindle bore diameter: 3.38\"
• AC high torque spindle motor (30 min. rating): 35 HP
• Maximum spindle torque (25% ED): 516 ft-lbs

Left/Right C-Axis:

• Minimum programmable angle (degrees): .001
• Rapid traverse rate (RPM): 400
• C-axis repeatability: +/- .006 deg.
• C-axis positioning accuracy: .0167 deg.

Milling Spindle:

• Spindle speed: 12,000 RPM
• Motor power (15 min. rating): 30 HP
• Maximum spindle torque (15% ED): 87 ft-lbs
• Tool index (2,3 or 4 insert multi-tools): 30 deg.
• B-axis (tilt) coupling increment: 5 deg.
• B-axis travel: 240 (+/- 120) deg.
• B-axis minimum increment: 0.001 deg
• B-axis positioning accuracy: 0.006 deg.
• B-axis repeatability: +/- 0.002 deg.

Travels:

• X1 (upper) axis travel: 24.8 in
• X2 (lower) axis travel: 8.66 in
• Z1 (upper) axis travel: 62.4 in
• Z2 (lower) axis travel: 59.6 in
• Angle of slant bed: 60 degrees
• X1 axis rapid traverse rate: 1,417 IPM
• 417 IPM Z1 axis rapid traverse rate: 1,417 IPM

Y-Axis:

• Y-axis travel: 9.05\" (+/- 4.52\")
• Y-axis rapid traverse rate: 1,024 IPM

ATC:

• Tool holder type: CAPTO-C6
• Tool storage capacity: 40 (Opt. 80)
• Max. tool diameter: 3.54 in
• Max. tool diameter w/o adjacent tools Max. tool diameter w/o adjacent tools: 5.12 in
• Max. tool length: 15.74 in
• Max. tool weight: 22 lbs.
• Tool change time (tool to tool): 1.8 Seconds

Turret - Lower:

• Number of tools: 12
• Tool holder type: BMT 65P

Live Tools Lower:

• Rotating tool RPM: 4,000 RPM
• Rotating tool spindle motor (continuous): 6.7 Hp
• Rotating tool torque (continuous): 12.5 ft-lbs

General:

• Floor Space (L x W): 239\" x 103\"
• Length with hinge belft chip conveyor: 263\"
• Machine Height: 119\"
• Net Weight: 34,170 Lbs
• Voltage: 205 - 235 V / 3 Ph
• Power Requirement (262 Amps @ 220 Volts): 100 kVA

Equipped With:

• Fanuc 31i Model A5 Dual Pathe Control
• High speed 4,000 RPM spindles
• Powerful (26kW) 35 HP high-torque integral spindle motors
• Refrigerated temperature control system for both spindles
• Large (76mm) 3 in bar capacity
• Milling, drilling, and tapping capabilities
• Servo Driven 40 station ATC with 1.8 sec tool to tool time
• Fast 12,000 rpm milling spindle
• (22kW) 30 Hp milling spindle motor
• Y-axis with (230mm) 9.05 in stroke
• Thermal Growth Compensation
• BT-axis (tilting) 240 degrees
• Roller gear cam (RGC) type B-axis gear train
• 12 Station lower turret with rotary tool capability
• Base mounted tooling (BMT) system on lower turret
• Full contouring C-axis
• Rigid tapping on left and right spindles, milling spindle and rotary tools
• Tool monitoring system - wear and breakage detection
• Pretensioned X and Z axis ball screws
• Fast (36m/min) 1,417 IPM rapid traverse
• Electric torque limiter crash protection
• Automatic tool setter
• Separate coolant tank
• Large (760mm) 29.9 in maximum turning diameter
• (10 bar) 145 PSI coolant pump for milling head
• Way lube separation system
• Right spindle body positioning by ball screw & servo motor
• Right spindle can be synchronized with left spindle