Description

Specifications:

• Maximum Wheel Size (OD x Width x ID): 20.08\" x 4.92\" x 8\"
• Distance between centers: 13.78\"
• Swing over table: 12.99\"
• Max grinding diameter: 7.87\"
• Max. workpiece weight (center supported): 110 lbs
• Max. workpiece weight (chuck supported): 88 Lbs x 7.87\"
• Number of speed steps: Infinite
• Max. grinding speed: 106.30 IPM

X-Axis:

• Wheelhead - Travel: 16.34\"
• Rapid Traverse Rate: 0.79 IPM
• Minimum Command Increment: 0.000004\"

Z-Axis:

• Saddle - Travel: 20.28\"
• Rapid Traverse: 787 IPM
• Minimum Command Increment: 0.000004

Workhead:

• Tapered Bore: MT #4
• Speed: 650 RPM
• Number of speed steps: Infinite

Tailstock:

• Tapered Bore: MT #4
• Quill Travel: 1.97\"
• Auto Taper Adjustment: +/- 0.003\"

Motors:

• Wheel Spindle: 10 HP
• Workhead (C-Axis): 2.7 HP
• Wheelhead (X-Axis) Feed: 1.6 HP
• Saddle Feed: 2.7 HP
• Coolant Pump: 1.5 HP
• Hydraulic Oil-Lube Pump: 0.5 HP
• Wheel Spindle Lube Pump: 0.13 HP

Tank Capacity:

• Coolant Tank: 75.7 gallons
• Hydraulic Oil - Lube Tank: 75.7 gallons
• Wheel Spindle - Lube Tank: 75.7 gallons

General:

• Weight: 10,560 Lbs

Equipped With:

• OSP-U-10G Control
• Auto direct work sizing system
• *Marposs 1 head type
• *Diameter 8-106 mm
• *Gauging head
• *1 set of Marposs Micromer 3
• *amplifire: 1 set of Marposs E 9
• Arrangement for above
• Spindle orientation, prox. Switch type
• heavy duty wheel spindle drive motor, 15 KW-4P inverter control instead of
• standard motor
• Marposs work locator, wheelhead mount type T25G
• wheel flange for 25-75 mm width for 25T
• wheel flange for 65-125 mm for 25T
• wheel balancing arbor, dia 70 mm
• wheel balancing stand for max dia 510mm (fixed type) wheel for 25T (std wheel
• is 75 mm)
• bed flusher coolant.

Comments:

• 156 hours of working hours
• When we bought it price with full equipment was $349,000
• Seller to load on buyer\s truck at machine location (Croatia)
• Video of this machine can be viewed at https://youtu.be/vkJZ20szYi4