Description

'

Spindle:

• Spindle Diameter: 6.1\"
• Spindle Motor: 74 / 50 HP
• Spindle Speeds: (4) 1 to 3500 RPM
• Range 1: 1 - 185 RPM
• Range 2: 174 - 463 RPM
• Range 3: 446 - 1190 RPM
• Range 4: 1116 - 3500 RPM
• Constant Torque (S6 - 40 Rating): 5532 Ft-Lbs
• Constant Torque (Continuous Rating): 3750 Ft-Lbs
• Spindle Taper: ANSI B5.50 #50

Travels:

• X-AxisTravel: 141.7\"
• Y-Axis Total (Vertical) Travel: 102.4\"
• Y-Axis Travel Above Table: 97\"
• Z-Axis (Spindle) Travel: 49.2\"
• W-Axis (Saddle) Travel: 59\"

Rapids:

• Rapid Traverse Rate: 709 IPM

Table:

• Built in Rotary Table: 63\" x 78.7\"
• Table Rotation (in .,001 Degree Increments): 360,000
• Rotary B Axis Feed: 6 PRM
• Max. Table Weight Capacity: 55,100 Lbs

Tool Changer:

• Pockets: 120 Positions
• Max Tool Weight: 110 Lbs
• Max Magazine Capacity: 6615 Lbs
• Max Tool Diameter (all pockets full): 4.9\"
• Max Tool Diameter (Adjacent Pockets empty): 9.8\"
• Max Tool Diameter: 11\"
• Max Tool Length: 28.5\"
• Max Tool Movement: 81 Ft-Lbs
• Tool to Tool Time: 15 Seconds

Coolant:

• Production Coolant System (Above Ground): 60 Hz
• Coolant Tank Capacity: 251 Gallons
• Coolant Thru Spindle: 1015 PSI
• Coolant Thru Nozzles: 160 PSI

Equipped With:

• GE Fanuc 310i High Performance CNC with Machine Control Panel
• Renishaw RMP60 Probe with Radio Tranmission
• 120 Position Automatic Tool Changer
• 3.5\" Floppy Disk Drive
• Rigid Tapping
• High Level Programming Capability
• Remote MPG, Traverse Rate - 709 IPM
• Built in Rotary Table: 63\" x 78.7\"
• All Hardened Ways
• Axis Feedback: Coded Linear Scale Feedback: X, Y & W Axes
• Servo Motor Encoded Z Axis
• Direct Feedback Encoder B-Axis
'