Reference #: 8224
Machine Type:
Year: 2005
Manufacturer: Tsugami
Model: BU26-SY
Control: Fanuc 18iTB
Condition: Good Used
Under Power: Yes
Code: A8175MS
Capacity:
Max machining diameter: 26 mm (1.023")
Max. machining length: 250 mm
Max. drilling diameter: 16 mm
Max. tapping diameter: M12
Main Spindle:
Max. spindle speed: 6000 rpm
Motor output: 5.5 / 7.5 kw
Rated torque: 35 N-m
Main spindle index: 5 degrees
Equipped With:
8 Station Interchangeable Tool Holders
QTY 1 - 3233-H040 - 4 Tool Turning Holder
QTY 2 - 3233-Y340 - Double Cross Drilling Head ER16
QTY 1 - 3233-Y360 - Powered Cross Drill ER25
QTY 2 - 3233-H060 - Double Axial Drilling Holder
QTY 1 - 3231-H010 - Single Axial Drill Holder
Full C Axis Control on Main Spindle
C Axis Indexing on Sub Spindle (5 Degree Resolution)
Chip Blaster 5 Channel High Pressure Coolant System (M Code Controlled)
LNS Hydrobar Express 332 Bar Loader
Collets and Guide Bushings Included
LNS 332 Swiss-Turn Interface 12ft. Mag. Barfeed
With 2-Channel Sets, Chipblaster 1000 PSI High Pressure System, All Available
Live & Static Tool Holders & Large Collet Set
Comments:
Runs great - holding tight tolerances
This is an (8) axis CNC Swiss Turn Pickoff spindle with Back Work Capabilities
with C & Y Axis Miling
Full installed running parts and can hav any tests done as needed
The shop has extra capacity and does need this machine
This Machine has (8) Fully Controllable Axis (X1, Y1, Z1, C1, X2, Y2, Z2, Z3)
Prep Local Rigging is Required
Video: https://rumble.com/vp6crn-tsugami-bu26-sy.html
Two (2) available