Description

Travels:

• X-Axis Travel: (Longitudinal Movement of Column): 51.2\"  to 1,300 mm
• Y-Axis Travel: (Vertical Movement of Spindle Head): 47.2\"  to 1,200 mm
• Z-Axis Travel: (Cross Movement of Table): 43.3\" to 1,100 mm
• Distance from Pallet Surface to Spindle Center: 2.0\" to 49.2\"
• Distance from Table Center to Spindle Gage Plane: 7.9 in to 51.2 in

Table:

• Pallet Working Surface: 31.5 in x 31.5 in
• Maximum Workpiece Swing Diameter: 51.2 in
• Pallet Loading Capacity: 4,400 Lbs
• Maximum Workpiece Height (24 Holes, Pitch (6.2 in) ): M16 (1/2-13 UNC) Tap
• Minimum Table Indexing Angle: 1 degree
• Table Indexing Time: 3.4 Sec

Spindle:

• Maximum Spindle Speed: 15,000 RPM
• Number of Spindle Speed Ranges: 1
• Type of Spindle Taper Hole: 7/24 Taper, No. 50
• Spindle Bearing Inner Diameter: 4.3\"

Feedrate:

• Rapid Traverse Rate: 1,653.5 IPM
• Feedrate: 0.01-1,653.5 IPM
• Jog Feedrate: 0-50 IPM <15 steps>

ATC:

• Type of Tool Shank: CAT 50 V-Flange
• Type of Retention Knob: 90 deg. Type
• Tool Storage Capacity: 60 Std.
• Max. Tool Diameter: (without adjacent tools): 4.9\" (12.6\")
• Max. Tool Length: 19.7\"
• Max. Tool Weight: 66 Lbs
• Method of Tool Selection (shorter route/ random access): Fixed address
• Tool Change Time: (Tool-to-Tool): 2.5 Sec
• Tool Change Time: (Chip-to-Chip): 6 Sec

APC:

• Number of Pallets: 2 Standard
• Method of Pallet Change: Turn-Type
• Pallet Changing Time: 14 Seconds

Motor:

• Spindle Drive Motor: (30 min./cont.): 40/33.5 HP
• Feed Motor: (X,Y & Z Axis): 7.9/9.7/9.7 HP
• Hydraulic Pump Motor: 3 HP
• Coolant Pump Motor: 1.3 x 2 HP

Power Source:

• Electrical Power Supply: 86.2 KVA
• Compressed Air Supply: 72.5 PSI, 137.3 GPM

Tank Capacity:

• Hydraulic Oil Tank Capacity: 10.6 Gal
• Lubrication Tank Capacity: .2 Gal. (for Spindle)
• Coolant Tank Capacity: 184.8 Gal.

Machine Size:

• Machine Height: 147.5”
• Floor Space (Actual width under): 12’x 22’ long
• Weight of Machine: 64,856 Lbs.

Equipped With:

• Turbo Md. 6586-8055 Rear external chip conveyor with drum type filter for “Fines”
• Auto Coupler hydraulic system for fixtures on turret
• 60 place ATC
• 15,000 rpm spindle
• Coolant thru spindle
• 48 sets of additional work coordinates
• Custom Macro B
• Tool Life Management
• One degree indexing
• Fanuc 18iMA control with MAPPS
• Two Signal Light Towers
• Manuals included: Installation, Maintenance, Parts, and 2) Electrical Circuit manuals

Standard Acc:

• 2 Pallet APC (Front Spin Type)(Tapped Pallets)
• Table Indexing 1 Degree
• Positioning Block for Optional Tooling
• 60 Tool ATC Magazine
• X,Y & Z Axis Direct Scale Feedback
• Center Through Conveyor Interface
• High Pressure Coolant System <64 psi>)
• Coolant Shower System <64 psi>
• Complete Covers
• Safety Door Interlock System
• Spindle Oil Cooler
• Automatic Power-Off System
• Coolant System
• Built-in Worklight
• Leveling Block
• Hand Tools
• Synchronized (HIGH SPEED) Tapping
• Level I High Speed Machining (Look Ahead Control)
• 320M <1,050 Ft.> Part Program Storage

Comments:

• Recent up grades made in 2013
• New way covers for X axis
• New ball screws for Y and Z axis
• New spindle
• Pallet changer rebuilt
• New hydraulic pump for Auto Coupler
• B axis rebuilt
• Condition is excellent
• Machine only ran aluminum parts at 6,000 rpm
• Original purchase price was: $624,240.00
• Video available upon request