Description

Specifications:

• Shut height, outer slide, stroke down, Adj. up on bed: 25\"
• Shut height, inner slide, stroke down, Adj. up on bed: 27.38\"
• Thickness of bolster plate: 5\"
• Area of slide, outer, R-L, F-B: 52\" x 32\"
• Area of slide, inner, R-L, F-B: 28\" x 16\"
• Area of bed, R-L F-B: 52\" x 32\"
• Area of bolster, R-L F-B: 52\" x 20\"
• Angular stroke displacement between the two slides,:
• outer slide leads by 25 degrees:
• Opening in bed, R-L, F-B: 40\" x 12\"
• Strokes per minute: 100 - 200 SPM
• Tonnage capacity of each slide is 30 tons at .25\" up:
• on stroke, 30 tons maximum on each slide:
• Usable energy at 100 spm is 16.5 inch tons:
• Diameter of crank shaft at man bearings: 5.5:
• Stroke of slide (Outer slide): 3.5\"
• Stroke of slide (Inner slide): 4:
• Adjustment of slide (Outer slide): 1\"
• Adjustment of slide (Inner slide): 1\"
• Upright opening: 16\"
• Size and speed of main drive motor: 40 HP at 1000 rpm

Comments:

• This machine never got released to the can production world, it was
• purchased new and used to prototype new dies and feed
• systems. It has a Minster feed system for 209 blanking forms and the last 209
• 10 out new die is still in the machine
• To blank and draw #209 alum ends - 10 out.
• Heavy duty high energy flywheel drive
• The frame is of two piece unitized construction
• Equipped with Minster Heavy Duty Hydraulic Operated Friction Clutch and Brake
• Spring actualted caliper brake also engages if hydraulic pressure is lost
• We can reinstall the drive motor and have it powered up and run it if necessary
• This press can be converted from a slant bed to straight up and down